This two - level profile connector is used with a 60 * 27 ceiling profile. In a suspended ceiling system, it is necessary to connect the profiles to each other.
It is used with a ceiling profile 60 * 27. In a suspended ceiling system, it is necessary to connect the profiles to each other. Dimensions 145x58x7 mm, made of galvanized steel 0.55 - 0.9 mm thick.
This connection is used to connect two ceiling profiles
Two - level crabs - perform the function of connecting profiles located in different levels crosswise. Fastened with two self - tapping screws, one on each side. Of course, you can replace the special connector with fasteners cut from the profile or similar parts, but it should be noted that all this is not able to provide the effect that the crab gives. Due to its design, it can be attached to the metal profiles of the gypsum board in any planes.
PRiMET accessories during installation work provide a more rigid and reliable fastening of profiles and make it possible to adjust their position in height.
|thickness (mm)||0.6 - 0.9|
|steel||HDGI; steel OTs 08ps 08kp|
|standard size (mm)||С6.60 145х58х7|
|maximum load||up to 25 kg|
Packs of 100
More details at https://primet-rnd.ru/